IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor - Manual (Page 34)

25
Please select the shutdown item to turn off the 10.2-inch combo DVR.
Figure 4-5
The other way is to press power button at the rear panel to turn off the device.
4.1.4 Auto Resume after Power Failure
The system can automatically backup video and resume previous working status after power
failure.
4.1.5 Replace Button Battery
Please make sure to use the same battery model if possible.
Please contact your local retailer before you replace the battery.
We recommend replace battery regularly (such as one-year) to guarantee system time
accuracy.
Before replacement, please save the system setup, otherwise, you may lose the data
completely!
4.2 Manual Record
4.2.1 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time and
channel name. If you want to change system date and time, you can refer to general settings
(Main Menu->Setting->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Setting->Display)
Preview Zoom Function
Move your mouse to the left top corner of the preview interface; you can see the preview
zoom button. See Figure 4-6. Left click the icon; you can see a hook icon. Now you have
enabled the preview zoom function. You can drag the mouse to zoom in the image.
Figure 4-6
Navigation Bar
In the preview interface, you can see the following navigation bar. See Figure 4-7.
1 Recording status 3 Video loss
2 Motion detection 4 Camera lock
Preview
zoom button