IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor - Manual (Page 11)

2
Support various playback modes: slow play, fast play, backward play and frame by frame play.
Support time title overlay so that you can view event accurate occurred time
Support specified zone enlargement.
z
Network operation
Support network remote real-time monitor, remote record search and remote PTZ control.
z
Alarm activation function
4-channel alarm input and 1-channel alarm outputs to realize alarm activation and on-site light
control.
The alarm input port and output has the protection circuit to guarantee device safety.
z
Communication port
RS485 port can realize alarm input and PTZ control.
RS232 port can connect to keyboard to realize central control, and can also connect to PC COM
to upgrade system and realize maintenance, and matrix control.
Standard Ethernet port can realize network access function.
z
PTZ control
Support PTZ decoder via RS485.
Support various decode protocols to allow the PTZ to control the speed dome.
z
Intelligent operation
Mouse operation function
In the menu, support copy and paste setup function
z
UPnP
It is to establish the mapping relationship between the LAN and the WAN via the UPnP protocol.
z
LCD Control Function
Press the power button in the front panel for a long time to boot up or shut down the device.
Press the power button in the front panel for a short time to open/close the LCD.
Support LCD standby setup function.
Mouse and remote control can awake the LCD.
z
Touch panel
It supports touch panel function.
Slight function differences may be found due to different series.
1.3 Specifications
Parameter
4-channel(With LCD or with
touch panel)
8-channel(With LCD or with
touch panel)
Main
Processor High-performance industrial embedded micro controller
System
OS
Embedded LINUX