GTCO AccuTab VI - Users Guide User Manual
Page 8
AccuTab VI 8
AccuTab VI Overview
The AccuTab VI digitizer consists of:
Active Area
The drawing area – the Active Area – is that portion of the tablet surface designated for
digitizing. Its boundaries are marked at each corner by a right-angle crop mark.
AccuSet Menu
Row of keys located across the top of the digitizer. It provides a means of configuring your
tablet so that it sends the appropriate information for a serial connection to the software
being used on the computer.
Indicator Light
The power/proximity LED in the upper right corner of the AccuTab VI is the Indicator
Light. It remains off when the power is on. However, it is solid green when the transducer
is in prox (within the range) of the Active Area.
Transducer
AccuTab VI uses a 16-button high-accuracy, illuminated cursor as the system transducer.
The corded high-accuracy cursor gets its power from the digitizer.