GME RX1300 - Manual (Page 7)

RX1300 INSTRUCTION MANUAL PAGE 7
KEY FUNCTION DESCRIPTION
1 - AW Automatic Write Automatically stores scanned frequencies in the
automatic memory storage area.
2 - MW Manual Write Allows manual storage of frequencies into the
manual memory storage area.
3 - MR Memory Read Allows reading of the frequencies in the
stored memories.
4 - CANC Cancel Used to cancel an incorrect input .
5 - Mode Mode Selects the receiver Modes
(AM, FM, WFM or Automatic).
6 - SKIP Skip Used to skip channels when scanning or skip
frequencies when searching.
7 - DW Dual Watch Activates or deactivates the Dual Watch function.
8 - PRI Priority Channel Activates or deactivates the selection of a
Priority Channel.
9 - TONE Tone Activates Activates or deactivates the selected CTCSS/
DCS tone. The required tone is selected from
the menu function in VFO Mode.
0 - DLY Delay Activates or deactivates the delay timer which
determines how long the radio will wait on a
frequency after a signal has disappeared. The
delay time is set from the menu function.
BANK
BAND
LMT Limit: Allows the entry of upper and lower frequency
limits when searching.
SCAN SRC
ATT Attenuator: Activates or deactivates the signal attenuator
to reduce the receiver’s sensitivity in strong
signal conditions.