GME RX1300 - Manual (Page 21)

RX1300 INSTRUCTION MANUAL PAGE 21
6. Press E/VFO again to copy the
original channel to the new channel.
The original channel will
remain unchanged.
Channel Move
To move one channel to another;
1. Select the channel that you would like
to move from.
2. Press Menu then use the control knob
or the volume keys to select
‘CH Move.
3. Press E/VFO to accept. The receiver
will then automatically select the next
empty channel in the same bank.
4. If you don’t wish to use the empty
channel selected by the receiver, use
the Control Knob, number keys or
the BANK/BAND key to select the
preferred channel and bank.
5. Press E/VFO again to move the
frequency to the new channel. The
original channel will now be empty.
All Clear
To erase ALL data from the memories;
1.Press Func/MR
2. Press Menu, then use the control
knob or the volume keys to select
‘ALL CLR’.
3. Press E/VFO. ‘dEF yES’ will
be displayed.
4. To continue with the All Clear, press
E/VFO again.
5. To cancel the All Clear, use the
Control knob to select ‘dEF NO’ then
press E/VFO.
Bank Clear
To erase a channel from the memory;
1.Press Func/MR
2. Select a channel within the Bank that
you wish to erase.
3. Press MENU, then use the control
knob or the volume 5/6 keys to select
‘bA CLR’.
4. Press E/VFO. ‘dEF yES’ will
be displayed.
5. To continue with the Bank Clear,
press EVFO again.
6. To cancel the Bank Clear, use the
Control knob to select ‘dEF NO’ then
press E/VFO.
Channel Clear
To erase a channel from the memory;
1. Press Func/MR.
2. Select the channel you wish to erase.
3. Press MENU, then use the control
knob or the volume keys to
select ‘CH CLR’.
4. Press E/VFO to erase the channel.