GME RX1300 - Manual (Page 3)

RX1300 INSTRUCTION MANUAL PAGE 3
ACCESSoRIES SUppLIED
FITTING AND REMoVING ThE BATTERy pACk
Fitting
1. Ensure the receiver is switched off.
2. Align the bottom of the battery pack with the securing slots in the base of
the receiver.
3. Press the top of the battery pack into the back of the receiver until it ‘clicks’.
Removing
1. Ensure the receiver is switched off.
2. Holding the receiver in one hand, press down on the battery release catch.
3. Swing the top of the battery pack away from the receiver.
COPYING FREQUENCIES BETWEEN
MEMORY BANKS . . . . . . . . . . . . . . 20
CLONING STORED MEMORIES WITH
ANOTHER UNIT . . . . . . . . . . . . . . . . 22
DCS TONE FREQUENCY CHART . . . . 23
CTCSS TONE FREQUENCY CHART . . 24
WARRANTY . . . . . . . . . . . . . . . . . . 25
SPECIFICATIONS . . . . . . . . . . . . . . . 27
Fitting the Battery
Removing the Battery
• Scanner Receiver
• Antenna
• Rechargeable Battery Pack
• Earphone • Charger Cradle
• Power Adaptor
• Lanyard Strap