GME RX1300 - Manual (Page 15)

RX1300 INSTRUCTION MANUAL PAGE 15
To stay on an active frequency
indefinitely or to stop the Dual Watch
function press Func DW again. The
receiver will exit the Dual Watch function.
MEMoRy BANkS
The scanner memory storage area has
a capacity of 1300 locations. These are
split into specific segments as follows:
1000 Manual Storage Memories.
200 Automatic Storage Memories.
50 Limited Search Memories
(2 x 25 pairs).
50 Dual Watch memories (2 x 25 Pairs).
MANUAL MEMoRIES
The Manual Memory area allows the
user to manually store up to 1000
individual frequencies. It is split into
memory banks with a maximum capacity
of 40 memory banks, each containing
25 memory locations (40 x 25 = 1000).
However the memory capacity of each
bank is flexible up to a maximum of 100
memories per bank, but at a reduction
in the number of banks available. For
example, in an extreme case where each
bank is programmed with the maximum
100 memories, the number of banks
available would be reduced to 10
(10 banks x 100 memories = 1000
memory capacity).
The default Manual memory banks are
labelled 00 to 39.
AUToMATIC MEMoRIES
The Automatic Memory area can store
up to 200 frequencies in two banks
of 100 memories. The automatic
memory is used when searching a
band of frequencies. The scanner
can automatically store any active
frequencies it finds while searching. The
Automatic Memory banks are labelled
A0 and A1.
LIMITED SEARCh MEMoRIES
The Limited Search Memories consists
of 50 memory locations split into 25
pairs of frequencies. The Limited Search
function allows you to specify the upper
and lower frequency limits of a section
of frequency band that you wish to scan.
These frequency limit ‘pairs’ can be
stored in the Limited Search memories
for recall at a later time.
The Limited Search Memory Upper and
Lower limits are identified as A and b.
The 25 pairs are therefore labelled A00,
b00 to A24, b24.
DUAL WATCh MEMoRIES
The Dual Watch function allows the
radio to switch between two selected
frequencies. The Dual Watch Memories
consists of 50 memory locations split
into 25 pairs of frequencies.
The two Dual Watch frequencies are
identified as A and b. The 25 pairs are
therefore labelled A00, b00 to
A24, b24.