GME RX1300 - Manual (Page 11)

RX1300 INSTRUCTION MANUAL PAGE 11
If Auto is selected the receiver will automatically select the appropriate default
Frequency Step for each band.
FREQUENCy BANDS
The scanner supports the following Frequency Bands:
FREQUENCy SEARCh
Band Search
Use the Search function to locate active frequencies in one or more bands
1. Press the E/VFO key to select VFO Mode. (Note: the receiver automatically selects
the VFO Mode when it is turned on).
2. Press the BAND key to select the required Band. There are 10 factory preset
bands to choose from (see Frequency Band Table).
3. Set the Squelch level using the Squelch or keys so that the noise
just disappears.
Frequency Band Startup Frequency Default Mode Default Step
150 kHz to 495 kHz AM 5 kHz
504 kHz to 1.620 MHz 1.5 MHz AM 5 kHz
1.625 MHz to 29.995 MHz 5 MHz AM 5 kHz
30 MHz to 87.975 MHz 51 MHz FM 25 kHz
88 MHz to 107.950 MHz 88 MHz WFM 100 kHz
108 MHz to 135.975 MHz 118 MHz AM 25 kHz
136 MHz to 255.100 MHz 150 MHz FM 25 kHz
255.1125 MHz to 382.100 MHz 370 MHz FM 12.5 kHz
382.125 MHz to 769.800 MHz 430 MHz FM 25 kHz
769.8125MHz to 960.100 MHz 850 MHz FM 12.5 kHz
960.125 MHz to 1309.975 MHz 1295 MHz FM 25 kHz