Philips CCZ192AT - Manual (Page 8)

8 Turning On the TVIYCR
Before you turn on theTV/VCR, make sure there are batteries in
the remote control and theTV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
I
Press the POWER button. The TV/VCR will come on and the
screen shown below will appear
^ SELECT LW^GUAGE
> engush on
ESPAfilOL
SELECT AT OR
PRESS MENU TO CONTINUE
2
Press the PLAY/A button or the STOP/T button to select
English or Spanish on-screen displays.
3
Press the MENU button. The screen shown below will appear
^ OOPtCCTANTB^OROaE
TOTVCR
THEN FRESSE
TO END PRESS EXIT
4
Press the F.FWD/^ button to begin automatic channel
setup. TheTV/VCR will memorize all available channels.When
channels are set, CHANNELS ARE SET will appear on-screen
briefly.Then theTV/VCR will go to the lowest channel pro­
grammed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message wilt appear on­
screen. Connect an antenna or cable to theTV/VCR, then try
again.You may need to follow the steps on page 10 instead.)
5
Use the CHANNEL A/T buttons or the Number buttons
on the remote control to select a TV/VCR channel. Use
the VOLUME A/Tbuttons to adjust the sound.
P&öS
PHILIPS
If you do not see any on-screen dis­
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine - / 0 to select o language and
set up channels.
To skip step 2, press the MENU
button.AII on-screen displays will be
in EngliskTo skip step 4, press the
STATUS/EXIT button. Channels will
not be set up, and CHANNELS NOT
SET will appear on-screen briefly.
You cannot set up channels if you
are using a Cable Box.
Line Input mode will always be
stored in the TVIVCR’s memory os
channel 00. When you select chan­
nel OO.A/V IN will appear on-screen
briefly. Press the CHANNEL A/T
buttons or Number buttons to select
another channel.