Philips CCZ192AT - Manual (Page 5)

Before Using the TV/VCR 5
Putting Batteries in the Remote Control
I
Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.
2
Place two AA batteries inside the battery compartment
with their + and - ends aiigned as indicated.
3
Replace the battery compartment lid.
2
3
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
I
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with ceilophane tape.
2
Using the Remote Control
• Point the remote control at theTV/VCR’s remote sensor
• Do not put objects between the remote control and the
TV/VCR.
VCR Maintenance
• In this TV/VCR, use only tapes with the IV hs I mark.
• Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
• Periodic maintenance is required to maintain yourTV/VCR’s
excellent performance.This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually require
cleaning or replacement. Cleaning or replacement of the video
heads should be performed by an authorized service center.
The remote control and its botteries
ore supplied.
Do not mix alkaline and man­
ganese batteries.
Do not mix old and new batteries.