Philips CCZ192AT - Manual (Page 32)

32 Timer Recording
Follow the steps below to program theTV/VCR to record TV pro­
grams while you’re away from home.TheTV/VCR will turn itself
on, record, and turn itself off automatically. Before you begin, make
sure:
• The dock 1$ set If not CLOCK MUST BE SET appears.
• Channels are set up.
• There is a tape in the TV/VCR. (Make sure the tape’s record tab
is intact and the tape is long enough to record the program.)
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step I.
I
Press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
( press «. I
J
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the P.FWD/I^ button«
VCR PROGRAM
> ONCE
OAIUY(MON.FRI)
WBBRLY
PROGRAM REVIEW
SELECT AV CHOOSE ^
TO END PRESS EWT
2-3
3
Press the PLAY/A button or the STOP/T button to select
a ONCE. DAILY, OR WEEKLY recording.Then, press the
F.FWD/^ button.
• ONCE: TheTV/VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY: TheTV/VCR will record every day from Monday to
Friday - starting at the same time and recording the same channel
for the same length of time.
• WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
Daily
/ daily program (MON-FW)
program . 1 2 S 4 5 S 7 8 -
Recording
(example)
SELECT program NUMBER
END PRESS EXrr
If the power foils, programmed
timer recordings will be restored
when the dock is reset (The dock
will reset itself automatically if you
are using the AUTO CLOCK feature.
Details ore on pages 1 4 - 1 7 . If
you are not using the AUTO CLOCK
feature, reset the clock manually.
Detoils ore on pages 12 - 13.) The
timer recording will not occur only if
the timer recording wos scheduled
to take place during the power fail­
ure.
You cannot set o timer recording if
DEFEAT RECORDING is set to ON,
Details are on page 36.