Philips CCZ192AT - Manual (Page 45)

Automatic Operation Features 45
The following playback features will always operate.
Automatic Playback
When you put a tape in theTVA/CR,the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on auto­
matically when you insert a tape with the record tab intact If a
timer recording is set and theTV/VCR power is off, theTV/VCR
will eject the tape if the record tab is missing.
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set the TV/VCR will only
rewind the tape to the point at which the counter was set to zero,
then stop. TheTV/VCR will not turn itself off or eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind­
ing a tape, REW -+ POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, theTV/VCR may only rewind
the tape to the point at which the counter was set to zero,dien
turn itself off.
Tape Eject
A tape can be ejected with theTV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however, you
may get a better picture using the manual tracking controls (see
below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL ▲/▼ but­
tons on the TV/VCR or the TRACKING A/T buttons on die
remote control.
Tracking returns to Automatic Tracking Adjustment when a tape is
inserted or when the STOP/T button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment