Philips CCZ192AT - Manual (Page 48)

4S Hefpfuf Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service.You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number
of your product before you call.This information is displayed on the back of the product Also, please take
a moment to identify the problem you are having, and be prepared to explain this to the representative. If
you believe the representative will need to help you with operations, please st^ near the product Our
representatives will be happy to assist you.
Location
For safe operation and satisfactory performance of yourTV/VCR, remember the following:
• Shield it from direct sunlight and keep it avray from sources of intense heat
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom
of theTV/VCR. Do not place theTV/VCR on a carpet as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
Electrical Shock And Fire Hazards
• Do not handle the power cord with v/et hands.
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall
outlet Grasp it by the plug.
• If water is spilled on theTV/VCR, unplug the power cord immediately and take theTV/VCR to an
authorized service center.
• Do not put your fingers or objects into theTV/VCR cassette compartment
• Do not place anything on top of theTV/VCR.
Dew Warning (Moisture Condensation) .
• Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heat­
ing a cold room, or when the humidity is high.There is no warning that moisture has accumulated in
yourTV/VCR. if you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and
theTV/VCR could be damaged. If you think moisture may have accumulated inside theTV/VCR, keep
theTV/VCR power on (but do not play a tape) for at least two hours.This will allow theTV/VCR to
dry.
TV/VCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly (pages 32 - 35). Midnight is 12 a.m.
Noon is 12 p,m.
• Make sure theTV/VCR power is off,
• Make sure the clock is set (pages 12 - IT).
■ Make sure there is a tape in the TV/VCR.The tape must have a record tab.
• If the power fails, pro^mmed timer recordings will be restored when the clock is reset (The dock
will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14 - 17. If
you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12 - 13.)
The timer recording will not occur only if the timer recording was scheduled to take place during the
power failure.
• Make sure DEFEAT RECORDING is set to OFF (page 36).
TV/VCR will not record.
• Make sure the tape has a record tab (page five).
• Make sure DEFEAT RECORDING is set to OFF (page 36).
• Plug the power cord into an active AC outlet (page seven).
• Check your hookups (pages six - seven).
• Set up the channels (page 10).