Philips CCZ192AT - Manual (Page 44)

44 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
I
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on-screen.
f CHIO
SIO?\
3
While the counter remains on-screen, press the CLEAR
button to reset the real-time counter to zero.
r
\ 0:00;00
)
4
While the counter remains on-screen, press the MEMORY
button so that M appears on-screen. To erase a real-time
counter memory, press die MEMORY button so that the M disap­
pears from the screen.
M 0:»;00 ^
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/'^ button or the
F.FWD/^ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/A button to
watch the tape.
D <5
o © © o
CD © ©
(©I
CD © © ©
CD
S s
vou«cl
The reoi-time counter memory will
not function during Repeat Play
mode. Details are on page 41.
You may oniy set one real-time
counter memory at a time. If you
try to set the real-time counter to
zero at a second location, the previ­
ous real-time counter to zero setting
will be lost