Philips CCZ192AT - Manual (Page 26)

26 On-Screen Status Displays
A status displs^ will appear when you press the STATUS/EXIT but­
ton or certain function buttons. The contents of the status display
will vary.To choose the status displ^ mode, follow the steps
below.
If you select STATUS ON.^en select COUNTER ONLY
OFF:
• Whenever you press the STOP/T button or the PLAY/A but­
ton, the status display will appear for five seconds.
If you select STATUS ON, then select COUNTER ONLY
ON:
• Whenever you press the PLAY/A button, the status display will
appear for W seconds. After five seconds, only the counter will
remain on-screen.
If you select STATUS OFF:
• The status display will not appear when you press function but­
tons. You must press the STATUS/EXIT button to see the status
display.
I
Press the MENU button.
2
Press the PLAY/A button or the STOP/T button to select
VCR SETUP, then press the F.FWD/^ button.
3
Press the PLAY/A button or the STOP/T button to select
ON-SCREEN MODE, then press the F.FWD/^- button.
4
Press the PLAY/A button or the STOP/T button to select
STATUS, then press the F.FWD/^ button so that ON or
OFF appears beside STATUS.
ON-SCREEN MODE
> STATUS
COUNTER ONLY
[ON]
lOFF]
I SELECT
AT
CHOOSE ► ,
\^TO END PR^ EXn~
^
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY/A button or the STOP/T button
to select COUNTER ONLY, then press the F.FWD/^ but­
ton so that ON or OFF appears beside it.
6
Press the STATUS/EXIT button.
lannel
Time
Function
Button
Pressed
CHIO
SLP
STOP
M 1:23:45 y/
Tape
Speed
Counter
and
Counter
Memory
If the channel you select has no
broadcast, the screen will be solid
blue.
You cannot view closed captions dur­
ing recording or tope f>layback if
COUNTER ONLY is set to ON.
Details are on pages 38 - 39.