Philips CCZ192AT - Manual (Page 37)

Setting the Sleep Timer 37
Use the sleep timer to program the TV/VCR to shut off in a cer­
tain amount of time.
I
Press the SLEEP button. The sleep timer display will appear
on-screen. (You can not set the sleep timer during a recording.)
f
^ SLEEP 0 MIN J
2
Within five seconds, press the SLEEP button repeatedly
to select 30 minutes, 60 minutes, 90 minutes, or 120 min­
utes. in a few seconds, the display will disappear.Then the TV/VCR
will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on-screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds before
the TV/VCR shuts itself off.
SLEEP 10 SEC
GOOD NIGHT
To see how much time remains until the TV/VCR shuts itself off,
press the SLEEP button once.The time remaining will appear on­
screen briefly.You cannot do this during a recording.
To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on-screen.The on-screen display will disappear in a
few seconds.You cannot cancel the sleep timer during a record­
ing. ......
Finish all recordings before the
TV/VCR shots itself off. If a record­
ing is in progress, the sleep timer
will be cancelled.
A timer recording will not begin
unless the TV/VCR power is off. Two
minutes before a timer recording
storts, PLEASE TURN OFF FOR
TIMER RECORDING flashes on­
screen. If you see this messoge, tom
off the TV/VCR
If the power fails, you might lose the
sleep timer setting.