Philips CCZ192AT - Manual (Page 30)

30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
• Channels are set up.
• There is a tape in theTV/VCR.The record tab must be intact.
I
Use the CHANNEL A/T buttons or the Number buttons
to select the channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP, LP, or SLP) appears on-screen.
Details are on page 29.
3
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately.The RECORD light will appear.
CHI2
LENGTH 0:30
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
Press the STOP/EJECT button
on the TV/VCR to stop the
OTR.
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/T button on the
remote control.
To check the time remoin/ng far on
OTR o/ter the OTR hos been set,
press the STATUSJEX/T button.
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button unti/ the
desired recording length oppeors ort-
screen.
You can not pouse on OTR
To conce/ on OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but­
ton.
You cannot record if DEFEAT
RECORDING is set to ON. Detoi/s
are on page 36.
You con change the tape speed with
the SPEED button while a recording
is in progress, but some distortion
may appear on the tape.