Philips CCZ192AT - Manual (Page 11)

4utomat/c C/ionne/ Setup (cont\i^) 11
Adding/Deleting Channels
I
Press the MENU button.
ADJUST PMSS f ►
CHi23
> CHANNEL 1 SAVED ]
INPUT
EX/T
PRIM. SETUP
VCR PROGRAM
VCR SETUP
2
Press the PLAY/A button or the STOP/T button to select
CHANNEL.
TO ADJUST PRESS-
CHIU
1/^
> channel 1 SAVED 1
INPUT
EXIT
PRIK SETUP
VCR PROGRAM
VCR SETUP
V
3
Press the Number buttons or the CHANNEL A/T but­
tons to enter the channel number you want to add or
delete.
^ TO ADJUST PRESS
CM13
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
4
press the F.FWD/^ button or the REW(ind)/-^ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
■ « ■ ' i
To review the channels memorized
by the TVIVCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/A button or the
STDP/T button to select
PRJM.SETUfi Press the
F.FWD/^ button.
3) Press the PLAY/A button or the
STOPfW button to select CH MEM­
ORY REVIEW. Press the F.f=WD/P-
button. A list of programmed chan­
nels will appear on-screen.
4) If all the programmed channels
don’t fit on-screen, press the F.FWD/
button. If you do not press the
F.FWD/^ button within 10 sec­
onds, the remaining channels will
appear on-screen. (If there are no
remaining channels, the previous
menu will appear.) Or press the
REW(ind)/^ button to see the pre­
vious screen of channels.
5) Press the STATUS/EXIT button
once or twice.