Philips CCZ192AT - Manual (Page 15)

5
Press the PLAY/A button or the STOP/T button to select
SET PBS CH.AUTO.Then, press the
F.FWD/^ button.
Setting the Clock (confd) 15
6
/SET AUTO CLOCK
TIME
date —/--/ --
NOW MARCHING
END PRESS EXIT
y
6
NOW SEARCHING flashes on theTV/VCR screen.
However, you may see the message;“PLEASETURN OFF TO SET
AUTO CLOCK PLEASE WAIT SEVERAL MINUTES.” If this mes­
sage appears, turn off theTV/VCR for a few minutes.When you
turn on the TV/VCR, the time will be set. If the time is not set,
repeat steps I • 5. Or, follow the steps on pages 12 - 13 to set the
clock manually or pages 16 - 17 to set the clock with Manual PBS
Channel Selection.
7
When theTV/VCR finds the PBS channel, the time will
appear on-screen. Press the STATU5/EXIT button.
/ set AUTO CLOCK
TIME
DATE
0 é : 3 0 m
07/01/98
WEDNESDAY
TO END PRESS EXIT
• If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen, you will be prompted to turn off the
TV/VCR.Turn off theTV/VCR.
Leave It off for several min­
utes. When you turn on theTV/VCR again,the dock will be seL
^ SET AUTO CLOCK
TIME —
DATE - - / - - / —
CANNCfr FIND CLOCK OAt
TO END PRESS EXIT
Wait for theTV/VCR to find
the time.
7
s n r s o i
PHILIPS
To display the time, press the STA-
TUS/EXIT button. A status display,
which incfudes the time, will appear
on the TV/VCR screen. Detoifs are
on page 26.
You must turn off the TV/VCR for
several minutes during automatic
dock setting. If the dock is not set
when you turn on theTV/VCR,
repeot the steps for Automatic PBS
Channel Selection. If the clock still is
not set, set the clock manually.
You connût use the AUTO CLOCK
Roture if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.