Warning – Futaba FX-40 User Manual
Page 18
18
CF Card CFDP32M
&)&RPSDFW)ODVKFDUGFDQVWRUHYDULRXV¿OHV
such as model data, music, sound and pictures. Its
memory size is 32MB.
Warning
Be sure to turn off the power to the transmitter
before inserting or removing the CF card.
As the CF card is a precision device, do not use
excessive force when inserting.
Be sure to use only Futaba's original CF card,
CFDP32M, for the T14MZ transmitter.
* Futaba does not recommend any CF cards other than
Futaba's original CF cards.
CF card insertion/removal
1. Turn off the power to the transmitter and
open the cover at the right side of the
transmitter.
2. Insert or remove the CF card.
[Card insertion]
(1) Open the cover in the
arrow direction.
(2) Insert the CF
card in the
direction shown
in the photo.
Cover
(3) Push in the
CF card.
Eject button
*Turn the CF card so that the front of the card faces the back
of the transmitter. Then slide the card into the slot.
*Insert the card into the slot until it touches bottom. At the
VDPHWLPHSXVKWKHHMHFWEXWWRQ
[Card removal]
CF card is
pushed out.
(1) Push the eject button.
:KHQWKHHMHFWEXWWRQLVSXVKHGWKH&)FDUGLVSXVKHGRXW
and can be removed.
3. Close the cover.
Read data from a PC
6DYLQJPXVLFDQGLPDJH¿OHVHGLWHGE\D3&LQWR
WKH&)FDUG\RXFDQXVHWKRVH¿OHVRQ\RXU);
transmitter. Equipment for reading and writing CF
cards are available at most electronics stores.
[Important]
Before saving data from the PC, insert the CF
card into the transmitter and turn on the power. To
VDYHD¿OHIURPWKH3&FRS\WKH¿OHWRDIROGHU
E\¿OHW\SHZKLFKDUHDXWRPDWLFDOO\ZULWWHQ
ŏ%033LFWXUHÀOHŏ:$9$XGLRÀOH
ŏ:0$0XVLFÀOHŏ02'(/0RGHOGDWD
*Use only CF card reader/writer that complies with CFA
(CompactFlashTM Association) standard.
Stored data
The life of the CF card is limited due to the use
of Flash memory. When you have a problem of
saving or reading data such as picture data after a
long period of use, please get a new CF card.
*We do not have the responsibility of compensating any
failure or damage to the data stored in the memory card no
matter what the reason is. Be sure to keep the backup of
your important data in your CF card.
*
No necessity for backup; FX-40 transmitters and CF cards
are using nonvolatile memory devices so that the data stored
in those will not be destroyed even without a backup battery.
The clock for the transmitter depends on the Lithium battery.