Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 55)

55
● Select the function name
and return to the System
menu by touching the
RTN button.
● Lock release
Every lock function's touch [ 1 second
or more ] of S1 button will release a
lock.
● Manual lock
If S1 button is touched 1 second
or more from a HOME screen, a
SensorTouch locks manually.
● Display of a lock
If locked, there will be sound and the
icon of a key will come out.
LOCK TIMER
OFF
START LOCK
OFF
AUTO LOCK
Auto lock method
1. Open the Auto lock screen in the system
menu.
LOCK TIMER OFF
START LOCK OFF
AUTO LOCK
2. Adjust the activation timer for the Auto
Lock function. The timer will begin counting
immediately when the HOME screen is not
used. The timer is adjustable in one second
increments up to 30 seconds. If the timer
value is OFF, this function is not applicable.
3.The Start Lock setting will, if enabled,
automatically lock the T8FG/S when the
transmitter is powered up. To allow access to
the transmitter's functions, press and hold the
S1 key for one second.
*If neither the Lock Timer or Start Lock functions are active
(OFF), then the key lock remains even if the power is turned
off.
*If the Lock Timer is enabled and the Start Lock is off, the key
lock status if canceled each time the T8FG/S is turned on.
LOCK TIMER SEC 5
START LOCK OFF
AUTO LOCK
LOCK TIMER SEC 5
START LOCK ON
AUTO LOCK
The Auto Lock function makes it possible to
automatically lock the transmitter to prevent any
unwanted programming/input when in use.
The auto lock function can be set in two ways.
LOCK TIMER
Auto Lock functions automatically when there is
no operation from the HOME screen display for a
chosen number of seconds.
START LOCK
Auto Lock functions automatically when the
model changes or power is turned on.
*To temporarily allow access to the T8FG/S' programming
press and hold the S1 key for one second. Please note, the
Auto Lock function timer will resume immediately once
again.
AUTO LOCK The automatic lock function of two kinds of SensorTouch
Danger
The Lock a SensorTouch during a
flight. If a SensorTouch is touched on
accidentally, a setup will change and
control will become impossible.