Futaba 8FGAS, 8FGHS 2.4GHz User Manual

Page 111

111

When setting a rate selection switch, move

the cursor to the switch item and touch the

RTN button to access the selection screen.

Select the switch and set its ON direction.

(Always ON at "--" setting)

*For a description of the switch selection method, see the

description at the back of this manual.

●Gyro type selection

Move the cursor to the gyro type selection

item and touch the RTN button to switch to

the data input mode. Select the gyro type

by scrolling the touch sensor.

[GY]: When a Futaba GYA gyro is used
[NORM]: When using something other than

Futaba GYA gyro is used.

Touch the RTN button to change the gyro

type and return to the cursor mode.

*When a Futaba GYA gyro is used and [GY] type is selected,

the sensitivity set value is directly read in both the AVCS

and NORM modes.

●Operation mode selection (GYA gyro)

Move the cursor to the operation mode

selection item and touch the RTN button

to switch to the data input mode. Select

the operation mode by scrolling the touch

sensor.

[AVCS]: AVCS mode
[NORM]: Normal mode
Touch the RTN button to change the

operation mode and return to the cursor

mode.

●Sensitivity setting

Move the cursor to the sensitivity item and

touch the RTN button to switch to the data

input mode.

Adjust the sensitivity by scrolling the touch

sensor.

Initial value: 0%
Adjustment range: 0~100%

*When the RTN button is touched for one second, the

sensitivity is reset to the initial value.)

Touch the RTN button to return to the cursor

mode.

(Example) Setting three axis using a GYA430 and GYA431 (2)

● Wing type: Aileron 2 servos mounted fuselage selected
● Set

5CH → GYRO

(GYA431AIL),

7CH → GYRO2

(GYA431ELE),

8CH → GYRO3

(GYA430RUD),

CTRL

and TRIM → [--]

: at the Function menu of the Linkage menu.

● GYRO setting of the Model menu.

*Set so that Rate 1 is turned on at the back position of switch E and Rate 3 is turned ON at the front position. Since

switch E is turned OFF at the center, Rate 2 remains [INH].

Rate

GYRO

GYRO ２

GYRO ３

TYPE

ACT/INH

AVCS : 60% AVCS : 60% AVCS : 60%

OFF/ON

INH

NORM : 60% NORM : 60% NORM : 60%

ON/OFF