4ws mixes "4ws, Steering, 3rd channel system), Display "4ws" screen by the following method – Futaba 4GRS User Manual

Page 80

Front axle only

（

4WS OFF）

Same steer

Reverse steer

Rear axle only

Press

(HOME screen)

(MENU 1 screen)

(4WS screen)

(MENU 2 screen)

Press

Select
"4WS "

tio

This function can be used with crawlers and other 4WS type vehicles. It is mixing which

uses the 1st CH to control the front axle steering and the 3rd CH to control the rear axle

steering.
OFF (front axle only), reverse steer, same steer, rear axle only and other 4WS type

switching is used by selecting SW1 with the function select switch function. If not se-

lected, is displayed. Therefore, select SW1.

4WS Mixes "4WS"

(Steering, 3rd channel system)

Setup items

MODE ：4WS Type
RATE ：3ch rate (Rear side)
MXMD ：Mix mode

4WS Mixes “4WS”

(Preparation)

Since this function is used by switching the type of 4WS with
a switch, the switch used by the function select switch dial
function is set.

4WS mixing adjustment

When the 3rd CH was set to ACT at Brake Mixing or when Gyro Mixing is used, 4WS

mixing cannot be used.

Setting Special mixings

Display "4WS" screen by the following method:

Function SW
4WS