Futaba 4GRS - Manual (Page 23)

23
B
ef
or
e Usi
ng
Operation of CH3 can
be checked.
Operation of CH4 can
be checked.
Switch Dial Operation CH3 CH4
(CH3: Switch SW2, CH4: Dial DL1)
The three-position switch SW2 will result in the servo arm moving to three differ-
ent positions when operated.
Note that this function cannot be assigned to the spring return switch SW1.
Rotating the Dial (DL1) will proportionally control a servo on CH4.
The SW2
switch and DL1 dial can be assigned to either function.
Switch （SW1） The function cannot
be assigned to SW1
•The servo arm position and dial
do not necessarily always match
exactly.
T4GRS beeps when the
dial reaches center and
limit position.
Switch （SW2）
3position Return
SW2 3CH Servo DL1 4CH Servo
Dial （DL1）
Initial setting