Futaba 4GRS - Manual (Page 64)

high
neutral
With "SPEED": Quick start without skidding
Without "SPEED": Slow start due to skidding
64
Fu
nc
tio
n
Servo Speed "SPEED"
(Preparation)
- On the SPEED screen make the following adjustments:
1
(Delay adjustment)
On the SPEED screen, Select the setting item
THR "TURN" using the (JOG) button up or
down operation and use the (+) or (-) buttons
to adjust the delay amount.
Throttle Speed adjustment
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
The throttle speed adjustment can be controlled with digital dial or digital trim with
the function select switch dial function.
Dial / Trim Setting
-Throttle servo (ESC) operation is slowed when the throttle
stick is pushed forward so that the wheels will not spin
even if the throttle is opened faster than required.
This function is not active when the stick is pulled back for
brake/reverse.
Operation
THR (Throttle Speed)
Sudden throttle stick operation on a slippery
surface will cause the wheels to spin, resulting
in poor acceleration. Setting the throttle speed
function reduces wasteful battery consumption
while at the same time enabling smooth, enjoy-
able operation.
100% 1%
Servo operation is delayed.
Adjustment range
1~100%
At 100%, there is no delay.
2
When completed, return to the MENU1 screen by pressing
the (JOG) button.