Flintec FT-12 Manual - Manual (Page 6)

FT-12 Technical Manual, Rev. 1.35 November 2010 Page 6 of 44
3 O VERVIEW
The type FT-12 weight indicator is an economic and powerful state-of-the-art instrument. Its application covers
any type of standard weighing process including dynamic weighing, check weighing and filling.
The accurate and versatile instrument is available in different housings, meeting the industries demand for
various environmental conditions.
FT-12 is approved by Weights & Measures Authorities for use in Accuracy Class III applications with up to 10
000 intervals according to OIML R76. It has a large 6 digit LED weight display (red, 20 mm or 14 mm high) with
weight status information. With a variety of interface options the FT-12 weight indicator is the perfect fit to
weighing systems and process control systems.
3.1 Key Features
 EU Type approved for 10 000 intervals
 Single or dual range
 Approved sensitivity 0.4 mV/e
 High internal resolution up to 8 000 000 counts
 Display resolution up to 60 000 counts
 Maximum conversion rate of 100/s
 Adaptive digital filter for fast and stable reading
 High resolution display mode
 Up to 6 load cells (350 ) or 18 load cells (1100 )
 Realtime clock
 Standard Serial interface RS232C
 Integrated AC power supply
 Zeroing with one button & Taring with one button
 Auto-zero tracking and auto-zero at power-up
 99 preset tare values & auto tare clear option
 Motion detection
 Printout in different formats incl. header and footer
 Totalizing and printing of consequential weighing results
 Setpoint monitoring (3 setpoints, digital I/O required)
 9 set point groups with 3 setpoints each
 5 standard application modes incl. check weighing, dynamic weighing, filling, and peak hold
 Key lock option to prevent unauthorized access
3.2 Available Options and Accessoires
 Alibi memory for up to 149 764 weighing results
 Additional serial interface RS232C
 Additional serial interface RS232C / 20 mA TTY CL* / RS485 (* not for stainless steel housing)
 Modbus RTU
 Ethernet TCP/IP and Modbus RTU over Ethernet
 Analogue output 0 – 10 V and 4 – 20 mA
 Binary data output (17-bit code)
 Digital inputs / outputs
 12 V DC (12…17 V DC) power inlet
 24 V DC (20…27 V DC) power inlet
 Rechargeable battery (for 230 V AC version only)
 Flintec IndFace Software