Expert Sleepers Silent Way v2.4.3 - Manual (Page 100)

Voltages
The Voltages section sets the actual output levels
that are generated for the Gate, Trigger and Ve-
locity outputs.
Gate Clsd/Open
Sets the voltages generated for the Gate signal
when the gate is closed and open respectively.
Trig Off/On
Sets the voltages generated for the Trigger signal.
Vel Min/Max
Sets the voltage range generated for the Velocity signal.
Overrides
The Overrides section lets you override the pitch and
gate outputs, so they’re no longer controlled by the
incoming MIDI notes. This is intended for use with
parameter automation, so you can create patterns less
easily obtainable by programming notes (e.g. pitch
ramps). Note that you can also automate the enable
buttons themselves, so you can switch between note
control and direct control within a sequenced pattern.
Pitch
The Pitch button enables the pitch override; the knob sets the overridden pitch. The pitch
knob is calibrated in MIDI note numbers (i.e. 1 increment per semitone).
Gate
The Gate button enables the gate override; the knob sets the overridden gate signal.