EVCO c-pro nano - Manual (Page 24)

C-PRO NANO HARDWARE MANUAL
Page 24
The user interface has a 7 segment, 4 digit display (plus decimal point), 6 icons and the user mode is achieved
using 4 keys.
Display
Number of digits 4
Colour Red
Led L0
Colour Red
Led L1 Colour Red
Led L2 Colour Red
Led L3 Colour Red
Led L4 Colour Red
Led L5 Colour Red
Keys
Number of keys 4
Set / enter key Normal pressing ENTER (confirms the value/runs the
command)
Pressed for approx. 3
seconds Accesses programming parameters
On-Off/esc key Normal pressing ESC (cancels the value/returns to the
previous menu)
Pressed for approx. 3
seconds Powers the unit on/off
Up key Normal pressing UP
Secondary function Programmable
Down key Normal pressing DOWN
Secondary function Programmable
Esc+enter keys Pressed for approx. 3
seconds Accesses the second level programming
parameters
Up+down key Pressed for approx. 3
seconds Displays device/firmware version, revision
information