6accessories, 2 c-pro exp micro dimensions/installation, 1 user terminals (intrabus) – EVCO c-pro nano User Manual

Page 19

background image

C-PRO NANO HARDWARE MANUAL

Page 19

5.2

C-PRO EXP MICRO dimensions/installation

The mechanical dimensions for the C-PRO EXP MICRO are given below; the measurements are in mm (in).

6

Accessories

6.1

User terminals (IntraBus)

User terminals allow the control units to be controlled remotely (display and commands). There are two
interface types, one panel-mounted, the other wall-mounted. The interface is connected to the special (powered)
serial connector of the C-PRO NANO controllers.

V LEDi

Panel-mounted version

V WALL

Wall-mounted version

See also other documents in the category EVCO Hardware: