EVCO EPV4RBR Hardware manual - Manual (Page 4)

Evco S.p.A. Vroom | Hardware manual ver. 1.00 | Code 114VROOHWE00
page 4 of 22
1. INTRODUCTION
1.1. Introduction
Vroom is a new and innovative user interface for the programmable controllers of the family c-pro 3.
The main features of the interface are the possibility to communicate to the user a great deal of information and the remarkable ease of control; these
features are due to the use of a 128 x 64 pixel single colour LCD graphic display (black with rearlighting through white LED), to the 6 buttons (with
preset functions) membrane keyboard and to the CAN bus (for the connection to the controllers).
This last also allows the use of the interface in multimaster networks.
The user interface incorporates a temperature sensor or a temperature and humidity one; the values read by these sensors are transmitted via CAN bus,
making easier the wiring.
Thanks to its constructive features, Vroom offers several mounting typologies; this is possible:
- by panel, at the front of units, of machines for refrigeration or for air conditioning, of electrical panels and as well as in all those
applications where a frontal protection degree IP65 is required
- built-in by wall, in traditional box (like "506" by BTicino)
- by wall, on the support CPVW00 by Evco (to order separately).
Also the necessity to customize the interface, in order to integrate it aesthetically in residential and commercial environments, is satisfied by Vroom
since at the front of the interface one can apply both the plates CPVP* by Evco (to order separately, made in plastic material and available in two
different colorations, white and black) and the numerous plates series "Living" and "Light" by BTicino.
Vroom also has got:
- real time clock
- alarm buzzer.