EVCO EPV4RBR Hardware manual - Manual (Page 12)

Evco S.p.A. Vroom | Hardware manual ver. 1.00 | Code 114VROOHWE00
page 12 of 22
To quit the procedure:
34. Press and release over and over again button ESC: possible modifications will not be saved.
Switch off the power supply and then switch it on after the modification of the configuration.
4.3. List of configuration parameters
Submenu Parameter Min. Max. Unit Default Description
Parameters DateCharSep - - - - - - - - - / Date separator (ASCII character)
Parameters Year format - - - - - - - - - YY
Year format
YY = two numbers (for example 10)
YYYY = four numbers (for example 2010)
Parameters Date format - - - - - - - - - dmy
Date format
ymd = year, month and day
mdy = month, day and year
dmy = day, month and year
Parameters TimeCharSep - - - - - - - - - : Time separator (ASCII character)
Parameters TimeWithSec 0 1 - - - 1
Showing the seconds in the real time
1 = yes
Parameters Time AM/PM 0 1 - - - 0
Time format
0 = 24 h (for example 15:20)
1 = 12 h (for example 3:20 PM)
Parameters Back Mode - - - - - - - - - TIME
Backlight mode
OFF = backlight is never lit
ON = backlight is always lit
TIME = backlight is lit the time one has
set with parameter BackTimeout
since the last operation with the
buttons
Parameters BackTimeout 0 240 s 60
Backlight duration (only if parameter Back Mode
has value TIME)
Parameters I/O Timeout 0 240 s 60
Local (or of the interface) CAN communication
time-out (after this time without CAN
communication, the display will show
Checking . . . and the l’I/O of the interface will
be disabled)