EVCO EPV4GBR Hardware manual - Manual (Page 4)

Evco S.p.A. Vgraph | Hardware manual ver. 1.01 | Code 114VGRAHWE01
page 4 of 22
1. INTRODUCTION
1.1. Introduction
Vgraph is a new and innovative user interface for the programmable controllers of the family c-pro that support the CAN bus and for the
programmable controllers of the family c-pro 3.
The main features of the interface are the possibility to communicate to the user a great deal of information and the remarkable ease of control; these
features are due to the use of a 128 x 64 pixel single colour LCD graphic display (black with rearlighting through white LED), to the 6 buttons (with
preset functions) membrane keyboard and to the CAN bus (for the connection to the controllers).
This last also allows the use of the interface in multimaster networks.
Thanks to its constructive features, Vgraph offers several mounting typologies; this is possible:
- by panel, at the front of units, of machines for refrigeration or for air conditioning, of electrical panels and as well as in all those
applications where a frontal protection degree IP65 is required
- built-in by wall, in traditional box (like "506" by BTicino)
- by wall, on the support CPVW00 by Evco (to order separately).
Also the necessity to customize the interface, in order to integrate it aesthetically in residential and commercial environments, is satisfied by Vgraph
since at the front of the interface one can apply both the plates CPVP* by Evco (to order separately, made in plastic material and available in two
different colorations, white and black) and the numerous plates series "Living" and "Light" by BTicino.
By request, Vgraph can be supplied with:
- real time clock
- alarm buzzer.