Eliminator Lighting TRiDiSC 9 IR - Manual (Page 9)

Eliminator Lighting - www.eliminatorlighting.com - Tri Disc 9 IR User Manual - Page 17
Tri Disc 9 IR Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
Tri Disc 9 IR Fuse Replacement
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 16 fixtures maximum. After the maximum fixtures
has been reached you will need to use a new power outlet. They
must be the same fixtures. DO NOT mix fixtures.
Tri Disc 9 IR Power Cord Daisy Chain
Tri Disc 9 IR Warranty
1 Year Limited Warranty:
Eliminator Lighting warranty is valid
from the date of purchase. Our 1 year limited warranty covers manu-
facturing defects only. Serial number, place of purchase with dated
valid receipt must be submitted at time of service. Eliminator Lighting
warranty does not cover items or parts prone to wear and tear: mo-
tors, fuses, brushes and belts. Eliminator Lighting warranty is only
valid with-in the United States.
Eliminator Lighting - www.eliminatorlighting.com - Tri Disc 9 IR User Manual - Page 18
Tri Disc 9 IR Notes