Eliminator Lighting Electro Splash User Manual

Electro splash

Electro Splash

SPECIFICATIONS:

Model: Electro Splash

LEDs:

54 x 5mm LEDs (12 Red,

12 Green, 12 Blue, and

White)

Weight:

1 lb.

Size:

7.75” x 7” x 5”

Supply Voltage:

100-240V / 50/60Hz

Power Consumption:

10W

Beam Angle:

30 Degrees

Working Position:

Any Safe position

Warranty:

90 Days

CAUTION! Please read and understand these instructions before installing or oper-

ating this unit. Never open unit when in use

Operating Instructions:

The Electro Splash is a powerful effect for clubs and dj’s. The Electro Splash is a light weight, com-

pact moonflower effect. This unit features an internal microphone that allows the beams to be trig-

gered by sound. The Electro Splash’s beams bounce up and down to the beat of the music. The

Electro Splash is ready to be hung or set on the ground in a safe position. When mounting this unit

to truss be sure to use a clamp. Plug the unit in to a standard wall outlet. After plugging the unit in,

the fixture will react to the beat of the music via the sound active internal microphone. The unit has a

sensitivity knob on the rear of the unit that makes more or less sensitive to sound. Turning the knob

in clockwise direction will make the unit more sensitive to sound. The unit requires sound to activate

the movement.