Eliminator Lighting Electro 56 LED User Manual

Electro 56 led, Specifications

Electro 56 LED

SPECIFICATIONS:

Model:

Electro 56 LED

LED’s:

108 (36 Red, 36 Green,

and 36 Blue)

Weight:

3.85lbs./ 1.75kgs.

Size:

6.88” (H) x 8.26” (W) x

8.6” (D)

Fuse:

1 Amp

Supply Voltage:

90v/240v ~ 60Hz/50Hz

Working Position:

Any Safe position

Duty Cycle:

None

DMX Channels:

Colors:

Multiple Colors

Warranty:

1 Year

CAUTION! Please read and
understand these instructions
before installing or operating
this unit.

Operating Instructions:
The Electro 56 LED has been tested at the factory, there is no assembly required. The unit is ready
to be plugged into a power outlet. This unit is a 4 channel DMX intelligent LED par can. It can be run
as a stand-alone unit, DMX controlled unit, or in a Master/Slave configuration. While in Stand Alone
or a Master/Slave configuration, you can run the auto mode, sound active mode, or control the col-
ors manually. For stand-alone mode, Master/Slave configuration, and DMX Control see other side.

Caution! Never open unit when in use.
Always disconnect main power before
replacing fuse. Remember to always
replace with the exact same type fuse.

1 Year Limited Warranty:

Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, leds, fuses, brushes and belts. Eliminator Lighting war-
ranty is only valid with-in the United States.