Eliminator Lighting Mirage LED User Manual

Mirage led, Specifications

Mirage LED

SPECIFICATIONS:

Model: Mirage LED

Supply Voltage:

100~240V 50/60Hz

LEDs:

8 LEDs - 2 Red, 2 Green,

2 Blue, & 2 White

Weight:

10.5lbs./ 4.8kgs.

Size:

22.8” (L) x 5.8” (W) x

4.5”

(H)

Fuse:

6.3

Amp

Power Cord Daisy Chain: 9 Fixtures Max.

Working Position:

Any Safe position

Duty Cycle:

None

DMX Channels:

6 DMX Channels

Colors:

RGBW

Warranty:

1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Operating Instructions:

The Mirage LED has been tested at the factory, there is no assembly required. The unit is ready to

be plugged into a power outlet. This unit is a 6 channel DMX intelligent LED par can. The Mirage

LED has three operating modes; Sound Active mode, Show mode, or as a DMX controlled unit. The

unit can run as a stand alone fixture or in a Master/Slave configuration.

Power Cord Daisy Chaining: With this feature you can connect the fixtures to one another using the

IEC input and output sockets. The quantity that can be connected is 9 fixtures maximum. After 9 fix-

tures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures.

Caution! Never open unit when in use.

Always disconnect main power before

replacing fuse. Remember to always

replace with the exact same type fuse.