beautypg.com

Eliminator Lighting LED Moon Beam User Manual

Led moon beam, Specifications

background image

CAUTION! Please read and under-

stand these instructions before

installing or operating this unit.

Operating Instructions:

This unit is a 3 channel DMX intelligent LED unit. It can be run as a stand-alone or in a master-slave

configuration. The unit has 3 operating modes; sound active mode, auto mode or DMX controlled.

This unit has been tested at the factory, there is no assembly required. The unit is ready to be

plugged in to a power outlet. To run the different operating modes, see the next page. To enhance

the beams use this effect with a fog machine.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Caution! Never open unit when in use.

Always disconnect main power before

servcing. Remember to always replace

with the exact same type fuse.

LED Moon Beam

SPECIFICATIONS:

Model: LED Moon Beam

Supply Voltage:

100V ~ 240V 60Hz/50Hz

LEDs:

5 x 3W LEDs

Power Consumption:

30W

Weight:

5lbs./ 2.2kgs.

Size:

7.7” (L) x 8” (W) x 10.5” (H)

Fuse:

1

Amp

Working Position:

Any Safe position

Duty Cycle:

None

DMX Channels:

3

Colors:

RGBWA

Warranty:

1 Year

Fuse Replacement: Locate and remove the unit’s power cord. Once the cord has been removed

located the fuse holder located inside the power socket. Insert a flat-head screw driver into the power

socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse

holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse with active fuse.