Eliminator Lighting Micro Swarm LED User Manual

Micro swarm led

SPECIFICATIONS:

Model: Micro Swarm LED

LED:

4 x 3W Quad LEDs

Weight:

6 lbs./2.5kg

Size:

8”L x 8”W x 7.5”H

Fuse:

Amp

Supply Voltage:

100 - 240V 50/60Hz

Power Consumption:

15W

Power Cord Daisy Chain: 29 Fixtures Max.

Working Position:

Any Safe position

Duty Cycle:

None

Colors:

Multiple Colored Lenses

Warranty:

1 Year

CAUTION! Please read and understand these

instructions before installing or operating this

unit.

Operating Instructions:

The Micro Swarm LED is a powerful effect for clubs and dj’s. The Micro Swarm LED creates a dra-

matic cluster of multi-dichroic colored beams. This unit features an external microphone that allows

the beams to be triggered by sound. The Micro Swarm LED’s beams bounce up and down to the

beat of the music. The Micro Swarm LED is ready to be hung or set on the ground in a safe position.

When mounting this unit to truss be sure to use a clamp. Plug the unit in to a standard wall outlet.

After plugging the unit in, the fixture will react to the beat of the music via the sound active external

microphone. The unit has a sensitivity knob on the rear of the unit that makes more or less sensitive

to sound. Turning the knob in clockwise direction will make the unit more sensitive to sound. The

unit requires sound to activate the movement.

Power Cord Daisy Chaining: With this feature you can connect the fixtures to one another using

the IEC input and output sockets. The quantity that can be connected is 29 fixtures maximum. After

29 fixtures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix

fixtures.

Caution! Never open unit when in use.

Always disconnect main power before

replacing the fuse. Remember to always

replace with the exact same type of fuse.

1 Year Limited Warranty:

Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Micro

Swarm LED