Compex Technologies NP25G 6C - Manual (Page 72)

Page 67
Use Remote Management
The advanced network administrator will be delighted to know that
remote management is supported on the router. With this feature
enabled, you will be able to access the router’s web-based
configuration pages from anywhere on the Internet and manage your
home/office network remotely.
1. Under the
CONFIGURATION
command menu, click on
Remote Management,
and you will be brought to
the following screen.
2. By default, Remote Management is disabled. (To disable Remote
Management, just enter 0 for Remote Http Port).
3. To enable Remote Management, enter a port number that is not being
used by other applications in the network. Please take note that it is
recommended to use a different port number other than port 80
because some ISP block port number 80.
!
In view of preventing unauthorized management from a
remote location, please remember to replace the default
password with a new one.
You are also advised to change this password from time to
time to guard against malicious attackers.