Compex Technologies NP25G 6C - Manual (Page 59)

Page 54
Setup WAN for ADSL Internet using L2TP
L2TP (Layer 2 Tunneling Protocol) is an extension to the PPP protocol used for Virtual
Private Networks (VPNs) that supports multiple protocols and unregistered and
privately administered IP addresses over the Internet.
Select
L2TP as your WAN Type at Select
WAN Type page.
At the WAN L2TP Setup page:
1. Select whether to enable DHCP.
2. Enter Client IP Address .
3. Enter Network Mask .
4. Enter the Gateway .
5. Enter the Username of your Internet
account.
6. Enter the Password of your Internet
account.
7. Enter the IP address of your VPN Server .
8. Enter an Idle Timeout value between
30-3600 seconds. Entering 0 will disable
this feature.
9. The Status section gives you a summary
of your connection settings such as:
• IP address
• Network Mask
• Gateway IP Address
10. If you are online, clicking Disconnect
will disconnect your connection.
1. Click Apply .
2. Click Reboot button to restart the
system and allow the changes to take
effect.
1
2
3