Compex Technologies NP25G 6C User Manual
Page 53
Page 48
Setup WAN for Cable Internet with Dynamic IP
Assignment
The router is pre-configured to support a WAN type that dynamically obtains an IP
address from the ISP. However, you may verify the WAN settings with the following
steps:
1. Under the CONFIGURATION
on the command menu, click
on WAN Setup.
2. On the WAN Dynamic Setup
screen that follows, verify that
the WAN Type reads Dynamic
(DHCP) in red colour.
Otherwise, click on the
Change button.
3. Simply select Dynamic IP
Address and hit the Apply
button.
4. Please remember to click
Reboot Router under SYSTEM
TOOLS and hit the Reboot
button to let the settings take
effect.