Compex Technologies NP25G 6C - Manual (Page 29)

Page 24
For ASCII key entry:
1. Select the ASCII radio button.
2. Select the radio button of the
key to be entered.
3. Select the key encryption
mode from the drop down
menu.
4. Fill in the key value.
An ASCII value can take in any
alphanumeric character and is NOT
case-sensitive.
For 64-bit encryption:
Your WEP key has to be 5
characters long.
For 128-bit encryption:
Your WEP key has to be 13
characters long.
5. Click on
Save .
6. If the key format is valid, the
page will refresh and the key
will appear in encrypted form.
To add more hexadecimal WEP keys,
repeat step 2.
To add more ASCII WEP keys, repeat step
2.
You can set a maximum of 4 WEP keys
using different key entry methods and
encryption levels.
To specify which key to use:
1. Select the radio button of the key to
be used.
2. Click on Apply , then on Reboot to
apply the changes.
3
4