Telnet console, Starting telnet – Comtrol DM Primo for Pair Connect and Raw Connect Methods User Manual
Page 25

DeviceMaster Primo for Pair and Raw Connect Methods
25
Telnet Console
Note: The Connection Status states that the device is transmitting.
12. Press the Enter key to return to the main menu. Select the Restart menu
item to restart the device, and save the changes.
13. You have to repeat this procedure for each client device.
Telnet Console
This section instructs you on how to use the Telnet Console Interface. The
following discussion and examples were generated by running Telnet from a
Windows NT host, although they apply equally well to all other Windows
operating systems.
Starting Telnet
1.
From the Windows desktop toolbar, select Start and then select Run. Type
telnet 192.168.127.254 in the Open text box (change the IP address if it is
different from the default address). Select OK to begin the Telnet session.
2.
Select option 1 for ansi/vt100, and press the Enter key.
This starts the Telnet Console Interface utility program, and displays the
console’s main menu.