Comtrol DM Primo for Pair Connect and Raw Connect Methods - Manual (Page 18)

DeviceMaster Primo for Pair and Raw Connect Methods 18
Raw Connection - UPD
10. Press the Esc key twice to return to the menu. Select the Monitor option.
11. Review the options, and make any desired changes.
Note: The Connection Status is set to listen. After you restart the device, the
TxChar Count and the Rx Char Count fields display data transfer
activity.
12. Press the Esc key to return to the menu. Select the Restart option to save any
changes.
Raw Connection - UPD
UDP Server Setting the parameters for a UDP Raw Connection requires two procedures.
Follow the UDP Server procedure first, then complete the UDP Client procedure.
1. From the Start menu, select the Run command.
LAN/WAN
Ethernet Hub
RS-232/422/485
serial device
Raw Connection - UDP Example
DeviceMaster
Primo (Multiple)
PC or
Mainframe
IP socket
application