Comtrol DM Primo for Pair Connect and Raw Connect Methods - Manual (Page 12)

DeviceMaster Primo for Pair and Raw Connect Methods 12
Raw Connection Mode
11. Press the Esc key to return to the menu. Select the Monitor option.
Review the options.
12. Press the Esc key to return to the menu. Select the Restart option to save any
changes.
Raw Connection Mode
This operation mode is used to transmit “raw” data between a remote network
card and a DeviceMaster Primo and then to a serial device. The word “raw” in this
case simply refers to the fact that DeviceMaster Primo does not strip away any of
the transmitted packets’ layers of data, but simply passes it on “as is.” You must
use either a Telnet Console or Console Terminal connection to set up this mode.
This Raw connection acts as a passive server (TCP Server) that listens for TCP
connection requests from client hosts. The host reads or writes the serial data bi-
directionally after the TCP connection has been established.
TCP Server 1. From the Start menu, select the Run command.
PC or
Mainframe
LAN/WAN
Ethernet Hub
RS-232/422/485
serial device
IP socket
application
Raw Connection Example
DeviceMaster
Primo