Configuring network interfaces – Comtrol RocketModem Driver Installation for Novell NetWare User Manual
Page 22
Configuring Network Interfaces
22
Configuring Network Interfaces
Follow these steps to configure each port:
1.
From the Internetworking Configuration menu, select Network Interfaces. The Network Interfaces status
window displays:
Each line is a port on your RocketPort or RocketModem. At this point the status of each port should be
Unconfigured.
2.
Select the first port to configure and press Enter.
For example, if you named the board RCKTMDM-1, the first port is RCKTMDM-1_1.
You are asked to select a medium.
3.
Select PPP and press Enter. The PPP Network Interface Configuration window displays:
Note: If this is a NetWare 5 system, the title of this screen is different.