Comtrol RocketModem Driver Installation for Novell NetWare - Manual (Page 17)

NIAS/MPR Installation and Configuration for NetWare 4.x 17
as an international board, certain harmless console messages may display.
9. Press the Esc key. The WHSMAIO Board Configuration window displays, this time including the board
and driver names.
10. If the first AIO port number is not 1, enter the first port number.
11. Enter the number of AIO ports and press Enter.
12. Press the Esc key.
13. When you are asked if you want to save your changes, select Yes and press Enter.
You are returned to the Configured Boards window and the RocketPort or RocketModem you just installed
displays on the list of configured boards:
14. If you have more RocketPort or RocketModem boards to configure, repeat Steps 3 through 14 as needed.
15. When you are done, press Esc. You are asked if you want to save your changes. Select Yes and press Enter.
This returns you to the Internetworking Configuration menu.
16. Go to Configuring Network Interfaces .