Netware connect configuration for netware 5.x – Comtrol RocketModem Driver Installation for Novell NetWare User Manual
Page 10
NetWare Connect Configuration for NetWare 5.x
10
NetWare Connect Configuration for NetWare 5.x
After the boards are initialized, follow these steps to configure remote access:
1.
Exit the GUI.
2.
Load the driver as discussed in
NWC/Third-Party Initialization and Configuration
3.
Load the NIASCFG program.
4.
Select Configure NIAS.
5.
Select Remote Access.
6.
Select Configure Ports. The Port Configuration screen displays:
7.
If necessary, use the cursor keys to scroll down the screen until the RocketPort or RocketModem ports
display. The default port names follow this form: AIO_130nppp, where n is the NetWare node and ppp is the
port.
8.
Select the port to be configured and press Enter. The cursor moves to the lower window and you can edit
the Port Name, Port Description, Modem Type, or Additional Parameters.