Comtrol RocketModem Driver Installation for Novell NetWare - Manual (Page 12)

NetWare Connect Configuration for NetWare 5.x 12
21. Select Setup, which brings up the System Setup Options menu.
22. Select Select Remote Access Ports. The list of valid NetWare Connect Ports displays:
If all ports you configured show up, the ports are set up correctly.
Note: The list of ports is sorted alphabetically. If you have changed any Port Names, the ports may appear
in different order here than they did on the Port Configuration screen.
23. Press ESC to return to the System Setup Options menu.
24. Select Define Remote Access Port Usage. The Port Usage Options menu displays:
25. Select port usage options as desired.
26. Press ESC to return to the System Setup Options menu.
27. Select Select Remote Access Services and set up services as needed.
28. Press ESC to return to the System Setup Options menu.
29. Press ESC to return to the Remote Access Options menu.
30. Press ESC to return to the Select Component to Configure menu.
31. Press ESC to return to the NIAS Options menu.
32. Select View Status for NIAS.