Platform resource usage, Rebuilding redboot, Arm/strongarm(sa1100) intel brutus – Comtrol eCos User Manual
Page 210: Overview, Initial installation method, Special redboot commands, Memory maps
Chapter 5. Installation and Testing
Platform Resource Usage
Timer3 is used as a polled timer to provide timeout support for networking and XModem file transfers.
Rebuilding RedBoot
These shell variables provide the platform-specific information needed for building RedBoot according to the
procedure described in
export TARGET=ebsa285
export ARCH_DIR=arm
export PLATFORM_DIR=ebsa285
The names of configuration files are listed above with the description of the associated modes.
ARM/StrongARM(SA1100) Intel Brutus
Overview
RedBoot supports both board serial ports on the Brutus board. The default serial port settings are 38400,8,N,1.
flash management is not currently supported.
The following RedBoot configurations are supported:
Configuration
Mode
Description
File
ROM
[ROM]
RedBoot running from the
board’s flash boot sector.
redboot_ROM.ecm
RAM
[RAM]
RedBoot running from
RAM with RedBoot in the
flash boot sector.
redboot_RAM.ecm
Initial Installation Method
Device programmer is used to program socketed flash parts.
Special RedBoot Commands
None.
106